Chevrolet AVEO (T255) HATCHBACKのエンジン予熱システム 04.2008 - ...
Chevrolet AVEO (T255) HATCHBACKのエンジン予熱システム
- 標準カタログ
- 新規カタログ(5個の商品)
Power:
Dimensions:
Lenght:
すべてのフィルタ
Power consumption:
Connector diameter:
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
商品コード:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
26464.72-12%23161.25 jpy -
-
26464.72 - 割引価格
- 23161.25 jpy
-
- 節約できる金額 3303.46 jpy (-12%)
-
- 店舗で
- 3 個
-
配達日:
29.04.2024, 13:37
- カートに追加
詳細
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
商品コード:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4928.31-13%4278.04 jpy -
-
4928.31 - 割引価格
- 4278.04 jpy
-
- 節約できる金額 650.27 jpy (-13%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
詳細 |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
商品コード:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
6301.12 jpy
- 価格: 6301.12 jpy
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
商品コード:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
23314.16-12%20548.38 jpy -
-
23314.16 - 割引価格
- 20548.38 jpy
-
- 節約できる金額 2765.77 jpy (-12%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
商品コード:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
25065.03-14%21556.56 jpy -
-
25065.03 - 割引価格
- 21556.56 jpy
-
- 節約できる金額 3508.46 jpy (-14%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | すべての特徴 |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
詳細 |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
商品コード:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
26184.11-12%22915.93 jpy -
-
26184.11 - 割引価格
- 22915.93 jpy
-
- 節約できる金額 3268.18 jpy (-12%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
商品コード:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
26409.27-12%23304.08 jpy -
-
26409.27 - 割引価格
- 23304.08 jpy
-
- 節約できる金額 3105.19 jpy (-12%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | すべての特徴 |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
詳細 |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
商品コード:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
27696.38 jpy
- 価格: 27696.38 jpy
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
商品コード:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
31645.08-5.9%29776.59 jpy -
-
31645.08 - 割引価格
- 29776.59 jpy
-
- 節約できる金額 1868.49 jpy (-5.9%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
ケーブルセット、エンジン予熱システム DEFA 460785
商品コード:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
13200.43 jpy
- 価格: 13200.43 jpy
-
- 注文可能
- 2 個
-
配達日:
29.04.2024, 13:55
- 新しいカタログへ
新しいカタログ で商品情報をご参照ください
ケーブルセット、エンジン予熱システム CALIX 1762460
商品コード:
AL72280392
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
12049.43 jpy
- 価格: 12049.43 jpy
- サプライヤー在庫: 利用不可
- 新しいカタログへ
新しいカタログ で商品情報をご参照ください
ケーブルセット、室内ヒーターファン (エンジン予熱システム) CALIX 1760025
商品コード:
AL72272342
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
14122.92 jpy
- 価格: 14122.92 jpy
- サプライヤー在庫: 利用不可
- 新しいカタログへ
新しいカタログ で商品情報をご参照ください
ENGINE HEATER TT-THERMO 1500KLD
商品コード:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
19743.52 jpy
- 価格: 19743.52 jpy
- サプライヤー在庫: 利用不可
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | すべての特徴 |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
詳細 |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Chevrolet AVEO (T255) HATCHBACK 用のすべての部品
- 割引商品
- プラスチック製インナーフェンダー -45%
- シール、シリンダーヘッドNEW! -45%
- オイルクーラー -43%
- 膨張バルブNEW! -43%
- シールリング、バルブシャフトNEW! -42%
- シール、インテークマニホールドハウジングNEW! -41%
- カバー、バンパーNEW! -40%
- シール、クランクケースエア抜きNEW! -40%
- エンジン予熱システム
- シール、サーモスタットハウジングNEW! -39%
- ベローズ、ドライブシャフトNEW! -39%
- トリム/保護ストリップ、クーラーグリルNEW! -38%
- 修理キット、ブレーキキャリパーNEW! -38%
- 室内エアダクト -38%
- コンデンサー、エアコン -38%
- 修理キット、クラッチスレーブシリンダーNEW! -38%
- ラバーストリップ、エグゾーストシステムNEW! -38%
- ホイールナットNEW! -38%
- スペーサーチューブ、ショックアブソーバーNEW! -38%
- ヒンジ、ボンネットNEW! -37%
- 車体部品
- バンパー -29%
- エンジンアンダーカバーNEW! -30%
- フェンダー -36%
- プラスチック製インナーフェンダー -45%
- ベンチレーショングリル、バンパー -26%
- グリル -36%
- 乗降部NEW! -34%
- Rear wheel archNEW!
- ボンネット -24%
- 牽引フックNEW!
- フロントフラップ -34%
- バンパー強化 -36%
- カバー、バンパーNEW! -40%
- カバー、メインヘッドライトNEW!
- フレーム、フォグライト
- ヒンジ、ボンネットNEW! -37%
- トリム/保護ストリップ、クーラーグリルNEW! -38%
- ヒッチNEW! -33%
- 解決済みNEW!
- 取り付け用キット、ボンネットNEW!
- Number plate base
- 保護フィルム
- チューニングパーツ
- ブレーキシステム
- ブレーキパッドNEW!
- ブレーキディスクNEW! -27%
- 修理キット、ブレーキキャリパーNEW! -38%
- ブレーキキャリパーNEW!
- ブレーキパッドセットNEW!
- パーキングブレーキワイヤーNEW! -35%
- ガイドスリーブセット、ブレーキキャリパーNEW!
- ブレーキホースNEW!
- アクセサリセット、ディスクブレーキパッドNEW! -36%
- メインブレーキシリンダーNEW!
- ホイールブレーキシリンダーNEW!
- ブレーキライト用スイッチNEW!
- ピストン、ブレーキキャリパーNEW! -36%
- アクセサリセット、パーキングブレーキパッドNEW!
- 修理キット、自動再調整NEW!
- ブレーキドラムNEW! -26%
- センサーリング、ABSNEW!
- ブレーキセット、ディスクブレーキNEW!
- ガイドスリーブ、ブレーキキャリパーNEW!
- 修理キット、ホイールブレーキシリンダーNEW!
- アジャスターセット、ドラムブレーキNEW!
- アジャスター、ドラムブレーキNEW!
- ホルダー、ブレーキホースNEW!
- きしみ防止フィルム、ブレーキパッド (バックプレート)NEW!
- ブレーキキャリパーホルダーセットNEW! -35%
- ケーブル修理キット、ホイール回転数センサーNEW!
- ワイヤー、サービスブレーキNEW!
- ブレーキセット、ドラムブレーキNEW!
- ステアリングパーツ
- 旋回レバーNEW!
- スタビライザーロッド/ストラットNEW!
- タイロッドヘッドNEW!
- サポート/ガイドジョイントNEW!
- ベアリングソケット、ウィッシュボーンNEW! -35%
- ベアリングソケット、スタビライザーNEW! -35%
- タイロッドNEW! -36%
- ステアリングギアNEW!
- サーボポンプNEW! -28%
- ベローズ、ステアリングNEW!
- スタビライザー、サスペンションNEW!
- キャンバ―修正ボルトNEW!
- 修理キット、サスペンションNEW!
- アクスルボディNEW! -31%
- ベローズセット、ステアリングNEW!
- ベアリング、ショックアブソーバーNEW! -36%
- 修理キット、スタビライザー連結ロッドNEW! -36%
- ステアリングセット、サスペンションNEW!
- ベアリング、アクスルストラットNEW!
- ステアリングロッドNEW!
- 固定ボルト、ウィッシュボーンNEW!
- ベアリングセット、アクスルボディNEW!
- スリーブ、ウィッシュボーンベアリングNEW! -36%
- ベアリング、アクスルボディNEW!
- ジョイント、ステアリングコラムNEW!
- 補償タンク、油圧オイル-パワーステアリングNEW!
- ステアリングセットNEW!
- ベアリングセット、スタビライザーNEW!
- シャフトシールリング、サーボポンプNEW!
- 電子部品
- 点火プラグNEW!
- ABSセンサーNEW!
- 燃料ポンプNEW!
- クランクシャフト位置センサーNEW! -37%
- イグニッションコイルNEW! -30%
- センサー、クーラント温度NEW! -36%
- 発電機NEW!
- ラムダセンサー
- スターターNEW! -32%
- グロープラグNEW!
- センサー、油圧NEW! -36%
- チャージ圧センサNEW! -37%
- エアフローメータNEW!
- ブレーキライト用スイッチNEW!
- 点火ケーブルセットNEW! -36%
- 発電機レギュレータNEW!
- スイッチ、後退灯NEW!
- 温度スイッチ、ラジエーターファンNEW!
- センサー、インテークエア温度NEW!
- ノックセンサーNEW!
- センサー、排気ガス圧力NEW!
- アイドリング制御バルブ、エア供給NEW!
- センサー、排気ガス温度NEW!
- センサー、スロットル状態NEW!
- ホルダー、カーボンブラシNEW!
- センサー、速度NEW!
- センサー、オイル温度NEW!
- マグネットスイッチ、スターターNEW!
- カーボンブラシ、スターターNEW!
- フリーホイールギア、スターターNEW! -36%
- ケーブルセット、パーキングアシストNEW!
- 電気セット、ヒッチNEW! -34%
- 回転数センサー、オートマチックトランスミッションNEW!
- ウォッシャーフルードポンプ、フロントガラスウォッシャーNEW!
- ハザード用リレーNEW!
- 整流器、発電機NEW!
- ピニオン、スターターNEW!
- センサー、距離NEW!
- リレー、スターターNEW! -36%
- グロープラグ、電気式補助ヒーターNEW!
- スイッチ、ブレーキ作動 (エンジン制御)NEW!
- 切り替えバルブ、切り替えフラップ (インテークパイプ)NEW! -34%
- 点火コイルユニットNEW!
- Battery booster/Jump starter
- Battery testers & chargers
- Electrical appliances
- インバーター
- ジャンプスタートケーブル
- スターターバッテリー -53%
- センサー/スイッチ(センサー)
- バッテリー充電器
- ロック
- 挿し込み式ハウジング各種
- 熱制御部品
- サーモスタットNEW!
- ラジエーター -32%
- ウォーターポンプNEW! -30%
- 室内エアダクト -38%
- コンデンサー、エアコン -38%
- クーラーキャップ -35%
- クーラーホースNEW! -33%
- 補償タンク -36%
- 抵抗、室内エアダクト -31%
- エアコン用コンプレッサーNEW! -27%
- 冷却ファン -33%
- ヒーター -35%
- 温度スイッチ、ラジエーターファンNEW!
- オイルクーラー -43%
- キャップ、オイルフィラーネックNEW! -36%
- クーラントパイプNEW!
- サーモスタットハウジングNEW!
- 乾燥機NEW!
- 圧力スイッチ、エアコンNEW!
- エバポレータ
- シール、サーモスタットNEW!
- 膨張バルブNEW! -43%
- ヒーターホースNEW! -36%
- シール、サーモスタットハウジングNEW! -39%
- シール、EGRバルブNEW! -36%
- シール、ウォーターポンプNEW! -37%
- シール、クーラントフランジNEW! -36%
- 不凍液NEW! -37%
- ヒーターエレメント、エンジン予熱システムNEW! -34%
- ドライブプレート、マグネットカプラ-コンプレッサーNEW!
- シール、オイルクーラーNEW!
- 圧力スイッチ
- コンプレッサー制御バルブ
- Air conditioning bearing
- Oring set
- R134a
- エンジン
- ロックボルト、オイルパンNEW!
- シール、シリンダーヘッドカバーNEW! -36%
- シール、シリンダーヘッドNEW! -45%
- シャフトシールリング、クランクシャフトNEW! -36%
- シールセット、シリンダーヘッドNEW! -31%
- 制御チェーンセットNEW!
- シリンダーヘッドボルトセットNEW!
- シール、インテークマニホールドNEW! -36%
- シール、エグゾーストマニホールドNEW! -35%
- チャージエアインテークホースNEW! -35%
- ピストンリングセットNEW! -36%
- プーリー、クランクシャフトNEW! -34%
- シールセット、バルブシャフトNEW! -35%
- 排気ガスフラップNEW! -36%
- コンロッドベアリングNEW!
- インレットバルブNEW! -36%
- バルブ、クランクケースエア抜きNEW!
- シールセット、クランクケースNEW! -36%
- インテークホース、エアフィルターNEW! -35%
- クランクシャフトベアリングNEW!
- タペットNEW!
- Sump -37%
- オイルポンプNEW!
- シリンダーヘッドカバーNEW! -34%
- 制御バルブ、カムシャフト調整NEW!
- 制御チェーンNEW!
- シールフルセット、エンジンNEW! -32%
- シールリング、バルブシャフトNEW! -42%
- シール、オイルフィルターハウジングNEW! -32%
- バルブガイドNEW! -37%
- シール、インテークマニホールドハウジングNEW! -41%
- シール、サーモスタットNEW!
- ロッカーアーム、エンジン制御NEW! -36%
- シールセット、オイルクーラーNEW! -34%
- カムシャフトNEW!
- シリンダーヘッドNEW!
- カムシャフト調整機構NEW!
- シャフトシールリング、カムシャフトNEW!
- ホース、シリンダーヘッドカバーエア抜きNEW!
- シール、オイルポンプNEW! -36%
- ロッカーアーム、エンジン制御NEW!
- ピストンNEW! -31%
- ギア、クランクシャフトNEW! -34%
- シール、制御ハウジングNEW! -26%
- シール、クランクケースエア抜きNEW! -40%
- シール、ハウジングカバー (クランクケース)NEW! -34%
- 配管NEW!
- スペーサー、クランクシャフトNEW!
- シール、インテーク/エグゾーストマニホールドNEW!
- シリンダーヘッドボルトNEW!
- ハウジング、オイルフィルターNEW!
- テンションレール、制御チェーンNEW!
- シャフトシールリング、カムシャフトNEW!
- ロッカーアームセット、エンジンコントローラ NEW!
- 潤滑パイプ、カム潤滑NEW!
- 接続ケーブル、油圧スイッチNEW!
- カムシャフト調整機セットNEW!
- ドライブトレインシステム部品
- ホイールベアリングセットNEW! -36%
- ジョイント、ドライブシャフトNEW! -35%
- ドライブシャフトNEW! -34%
- ベローズ、ドライブシャフトNEW! -39%
- シャフトシールリング、ディファレンシャルNEW! -36%
- シャフトシールリング、ドライブシャフトNEW!
- シャフトシールリング、マニュアルトランスミッションNEW! -35%
- アクスルナット、ドライブシャフトNEW!
- ジョイント、ステアリングシャフトNEW! -35%
- オイル、マルチプレートクラッチ-4WDNEW!
- シール、オートマチックトランスミッションNEW! -36%
- シール、マニュアルトランスミッションNEW!
- クランプスリーブ、レリーズフォークNEW!
- エンジン、トランスミッション、ドライブシステムのマウンティング
- ウィンドウレギュレーター
- トランスミッション
- 工場設備
- その他
- シールNEW!
- フロントガラスNEW!
- エンジンオイルNEW!
- スペーサーチューブ、ショックアブソーバーNEW! -38%
- オートマチックトランスミッションオイルNEW!
- スペーサリングNEW!
- リアウィンドウNEW!
- オートマチックトランスミッションオイルNEW!
- サイドウィンドウNEW!
- Oリング修理キットNEW! -36%
- シール、スイッチングハウジング-トランスミッションNEW!
- アングルドライブ、スピードメーターシャフトNEW!
- ソケット、接続ロッドNEW!
- スペーサーチューブNEW!
- VベルトセットNEW!
- その他
- アースケーブル、点火ディストリビュータ
- カバー、バッテリー端子クランプ
- キャリングバッグ
- クラクション
- ハンドポンプ
- バッテリー極クランプ
- ワイヤーブラシ、バッテリー極/クランプクリーニング
- 車両-コンビネーション塗料
- 暖房システム
- 付属品
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Car flags
- Car seat covers
- Children's goods
- Clamps and ties
- Covers for car documents
- Electronic parking clock
- Fefrigerators and cooling boxes
- First aid kit
- Flashlights, lamps
- Indicators
- Inner tubes
- Interior freshener
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Parking assistant system -22%
- Parking clock
- Pets
- Rudder cover
- Stickers and car identification
- Tape
- Tint films for car
- Vacuum Cleaners
- Warn jacket
- Warning triangle
- Winches
- Wipes
- すき
- アイススクレーパー
- アクセサリ
- エアダクト
- キャニスター
- キーホルダーセット
- シガーライター
- ステッカー
- スポンジ
- ボールロッドホルダー、ヒッチ
- マルチメータ
- リフレクター
- ルーフキャリア
- ルーフボックス
- 回転灯
- 水用キャニスタ
- 消火器
- 無線
- 牽引ワイヤー
- 絶縁テープ
- 車両洗浄ブラシ
- 防護眼鏡
- ユニバーサルベアリング
- 化学および化粧品ケア製品
- あなたにお勧め
- 暖房システム
- エンジン予熱システム
- Chevroletのエンジン予熱システム