Peugeot 806のエンジン予熱システム 06.1994 - 07.2002
Peugeot 806のエンジン予熱システム
- 標準カタログ
- 新規カタログ(8個の商品)
Power:
Dimensions:
Lenght:
すべてのフィルタ
Power consumption:
Connector diameter:
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
商品コード:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
26464.72-12%23161.25 jpy -
-
26464.72 - 割引価格
- 23161.25 jpy
-
- 節約できる金額 3303.46 jpy (-12%)
-
- 店舗で
- 3 個
-
配達日:
29.04.2024, 08:28
- カートに追加
詳細
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
商品コード:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4928.31-13%4278.04 jpy -
-
4928.31 - 割引価格
- 4278.04 jpy
-
- 節約できる金額 650.27 jpy (-13%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
詳細 |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
商品コード:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
6301.12 jpy
- 価格: 6301.12 jpy
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
商品コード:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
23314.16-12%20548.38 jpy -
-
23314.16 - 割引価格
- 20548.38 jpy
-
- 節約できる金額 2765.77 jpy (-12%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
商品コード:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
25065.03-14%21556.56 jpy -
-
25065.03 - 割引価格
- 21556.56 jpy
-
- 節約できる金額 3508.46 jpy (-14%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | すべての特徴 |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
詳細 |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
商品コード:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
26184.11-12%22915.93 jpy -
-
26184.11 - 割引価格
- 22915.93 jpy
-
- 節約できる金額 3268.18 jpy (-12%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
商品コード:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
26409.27-12%23304.08 jpy -
-
26409.27 - 割引価格
- 23304.08 jpy
-
- 節約できる金額 3105.19 jpy (-12%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | すべての特徴 |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
詳細 |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
商品コード:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
27696.38 jpy
- 価格: 27696.38 jpy
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
商品コード:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
31645.08-5.9%29776.59 jpy -
-
31645.08 - 割引価格
- 29776.59 jpy
-
- 節約できる金額 1868.49 jpy (-5.9%)
-
- 注文可能
- 5 個
-
配達日:
03.05.2024, 11:55
- カートに追加
詳細
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
ケーブルセット、エンジン予熱システム CALIX 1762461
商品コード:
AL72276912
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
12669.46 jpy
- 価格: 12669.46 jpy
-
- 注文可能
- 5 個
-
配達日:
29.04.2024, 13:55
- 新しいカタログへ
新しいカタログ で商品情報をご参照ください
ケーブルセット、エンジン予熱システム DEFA 460785
商品コード:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
13200.43 jpy
- 価格: 13200.43 jpy
-
- 注文可能
- 2 個
-
配達日:
29.04.2024, 13:55
- 新しいカタログへ
新しいカタログ で商品情報をご参照ください
ケーブルセット、室内ヒーターファン (エンジン予熱システム) CALIX 1760015
商品コード:
AL72268892
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
13292.85 jpy
- 価格: 13292.85 jpy
-
- 注文可能
- 3 個
-
配達日:
29.04.2024, 13:55
- 新しいカタログへ
新しいカタログ で商品情報をご参照ください
ENGINE HEATER TT-THERMO 1500KLD
商品コード:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
19743.52 jpy
- 価格: 19743.52 jpy
- サプライヤー在庫: 利用不可
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | すべての特徴 |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
詳細 |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Peugeot 806 用のすべての部品
- 割引商品
- コネクターピース、ウォッシャーフルードラインNEW! -66%
- ヒーターホースNEW! -47%
- インレットバルブNEW! -47%
- プラスチック製インナーフェンダー -45%
- シール、サーモスタットNEW! -43%
- シール、ウォーターポンプNEW! -43%
- 調整ディスク、バルブ遊びNEW! -43%
- スタビライザーロッド/ストラットNEW! -42%
- シールリング、クーラントラインNEW! -42%
- シール、過給器NEW! -42%
- ネジNEW! -42%
- グロープラグ -40%
- アイドリング制御バルブ、エア供給NEW! -40%
- シールセット、シリンダーヘッドNEW! -40%
- シリンダーヘッドボルトセットNEW! -40%
- エンジン予熱システム -32%
- ボルトセット、プーリー-クランクシャフトNEW! -39%
- キャップ、燃料容器 -39%
- インジケータランプNEW! -38%
- エアフィルターNEW! -38%
- チューニングパーツ
- ブレーキシステム
- ブレーキパッドNEW! -22%
- ブレーキディスクNEW!
- 修理キット、ブレーキキャリパーNEW! -36%
- ブレーキキャリパーNEW!
- ブレーキパッドセットNEW!
- パーキングブレーキワイヤーNEW! -36%
- ガイドスリーブセット、ブレーキキャリパーNEW!
- ブレーキホースNEW! -27%
- アクセサリセット、ディスクブレーキパッド
- メインブレーキシリンダーNEW!
- ホイールブレーキシリンダー
- ブレーキライト用スイッチNEW!
- ピストン、ブレーキキャリパーNEW! -36%
- アクセサリセット、パーキングブレーキパッドNEW! -24%
- 摩耗表示NEW!
- 修理キット、自動再調整NEW! -36%
- ブレーキドラムNEW! -26%
- センサーリング、ABSNEW!
- 修理キット、メインブレーキシリンダーNEW!
- 負圧ポンプ、ブレーキ装置NEW!
- ガイドスリーブ、ブレーキキャリパーNEW!
- 修理キット、ホイールブレーキシリンダーNEW!
- アジャスターセット、ドラムブレーキNEW!
- 修理キット、エキスパンダーNEW!
- ブレーキブースターNEW!
- ブレーキ力レギュレータNEW! -34%
- ブレーキパッドNEW!
- きしみ防止フィルム、ブレーキパッド (バックプレート)NEW!
- ケーブル修理キット、ホイール回転数センサーNEW!
- ワイヤー、サービスブレーキNEW!
- 修理キット、ブレーキ力レギュレータNEW!
- ボルトセット、ブレーキディスクNEW!
- ブレーキセット、ドラムブレーキNEW!
- 油圧ユニット、ブレーキ装置NEW!
- ワイヤーセット、パーキングブレーキNEW!
- ステアリングパーツ
- 旋回レバー
- スタビライザーロッド/ストラットNEW! -42%
- タイロッドヘッドNEW!
- ベアリングソケット、ウィッシュボーンNEW!
- ベアリングソケット、スタビライザーNEW!
- タイロッドNEW!
- ステアリングギアNEW! -17%
- サーボポンプ -32%
- ベローズ、ステアリングNEW!
- キャンバ―修正ボルトNEW!
- 修理キット、サスペンションNEW!
- アクスルボディNEW! -27%
- ベローズセット、ステアリングNEW!
- 修理キット、スタビライザー連結ロッドNEW!
- ステアリングセット、サスペンションNEW!
- ベアリング、スタビライザー連結ロッドNEW!
- ベアリング、アクスルボディNEW!
- スプリングマウントNEW!
- 電子部品
- 点火プラグNEW! -35%
- ABSセンサーNEW! -33%
- クランクシャフト位置センサー -36%
- 燃料ポンプNEW! -36%
- イグニッションコイルNEW! -28%
- センサー、クーラント温度NEW!
- 発電機NEW!
- ラムダセンサー
- スターターNEW!
- グロープラグ -40%
- センサー、油圧NEW!
- チャージ圧センサ -35%
- エアフローメータ
- 点火ケーブルセット
- ブレーキライト用スイッチNEW!
- 発電機レギュレータNEW!
- スイッチ、後退灯NEW!
- 温度スイッチ、ラジエーターファンNEW!
- センサー、インテークエア温度NEW!
- センサー、外気温度NEW!
- コントローラ、グロー時間NEW!
- ノックセンサーNEW! -35%
- センサー、排気ガス圧力NEW!
- アイドリング制御バルブ、エア供給NEW! -40%
- センサー、スロットル状態NEW! -34%
- 多機能リレーNEW!
- センサー、アクセルペダルの状態NEW!
- ホルダー、カーボンブラシNEW!
- センサー、速度NEW!
- センサー、オイル温度NEW!
- 点火モジュールNEW!
- 高圧ポンプNEW!
- ケーブル修理キット、グロープラグNEW!
- センサー、速度/回転数NEW!
- マグネットスイッチ、スターターNEW!
- リレー、作業用電流NEW!
- リレー、ワイパー間欠時間NEW!
- 点滅発信機NEW!
- カーボンブラシ、スターターNEW!
- フリーホイールギア、スターターNEW!
- スピードメーターシャフトNEW!
- ケーブルセット、パーキングアシストNEW!
- 電気セット、ヒッチNEW!
- 回転数センサー、オートマチックトランスミッションNEW! -35%
- センサー、燃料レベルNEW!
- プラグ、点火コイルNEW!
- ウォッシャーフルードポンプ、フロントガラスウォッシャーNEW!
- リレー、エアコンNEW!
- ハザード用リレーNEW!
- 研磨リング、発電機NEW!
- 整流器、発電機NEW!
- 点火ケーブルNEW! -36%
- ピニオン、スターターNEW!
- プーリー、発電機NEW!
- リレー、スターターNEW!
- 油圧スイッチ、パワーステアリングNEW!
- RPM Sensor, engine managementNEW!
- グロープラグ、電気式補助ヒーターNEW!
- 操作エレメント -30%
- スイッチ、ブレーキ作動 (エンジン制御)NEW!
- ケーブル修理キット、中央電気回路NEW!
- コントローラ、点火装置NEW!
- シフトバルブ、オートマチックトランスミッションNEW!
- 多機能スイッチNEW!
- リレー、コールドスタート制御NEW!
- スイッチ、走行モードNEW!
- 修理キット、スターターNEW!
- センサー、シリンダーヘッド温度NEW!
- センサー、縦方向加速NEW!
- コントローラ、インジェクション装置NEW!
- Battery booster/Jump starter
- Battery testers & chargers
- Electrical appliances
- インバーター
- ジャンプスタートケーブル
- スターターバッテリー
- センサー/スイッチ(センサー)
- バッテリー充電器
- ロック
- 挿し込み式ハウジング各種
- 熱制御部品
- サーモスタットNEW!
- ラジエーター
- ウォーターポンプNEW! -29%
- 室内エアダクト -32%
- コンデンサー、エアコン
- クーラーキャップ -37%
- クーラーホースNEW! -35%
- 補償タンク -35%
- 抵抗、室内エアダクト -35%
- エアコン用コンプレッサーNEW! -27%
- ヒーター
- 冷却ファンNEW! -34%
- インタークーラー
- 温度スイッチ、ラジエーターファンNEW!
- クーラントフランジNEW! -38%
- オイルクーラー
- キャップ、オイルフィラーネックNEW!
- クーラントパイプNEW! -36%
- サーモスタットハウジングNEW!
- 乾燥機NEW! -19%
- マグネットカプラ、エアコンコンプレッサーNEW!
- 圧力スイッチ、エアコンNEW!
- エバポレータNEW!
- シール、サーモスタットNEW! -43%
- 膨張バルブNEW!
- ヒーターホースNEW! -47%
- シール、サーモスタットハウジングNEW! -38%
- シール、EGRバルブNEW! -36%
- レベルセンサーNEW!
- シール、ウォーターポンプNEW! -43%
- シール、クーラントフランジNEW! -33%
- 不凍液NEW!
- ヒーターエレメント、エンジン予熱システムNEW! -35%
- ドライブプレート、マグネットカプラ-コンプレッサーNEW!
- 圧力スイッチ
- シールリング、クーラントラインNEW! -42%
- 制御エレメント、混合管フラップNEW!
- A/C compressor clutch coil
- 温度スイッチ、クーラント警告ランプNEW!
- 接続/ディストリビュータピース、配管NEW!
- 修理キット、エアコンNEW!
- シール、エアコンコンプレッサーNEW!
- センサー、エンジンルーム温度NEW!
- Air conditioning bearing
- Oring set
- R134a
- エンジン
- ロックボルト、オイルパンNEW! -38%
- シール、シリンダーヘッドカバーNEW! -36%
- シール、シリンダーヘッドNEW! -34%
- シャフトシールリング、クランクシャフトNEW!
- シールセット、シリンダーヘッドNEW! -40%
- 制御チェーンセットNEW!
- シリンダーヘッドボルトセットNEW! -40%
- シール、インテークマニホールドNEW! -38%
- シール、エグゾーストマニホールドNEW! -38%
- チャージエアインテークホースNEW! -31%
- ピストンリングセットNEW! -35%
- オイルレベルゲージNEW! -37%
- シール、オイルパンNEW!
- プーリー、クランクシャフトNEW! -31%
- シールセット、バルブシャフトNEW! -36%
- 排気ガスフラップNEW! -38%
- マウントキット、過給器NEW! -36%
- コンロッドベアリングNEW! -34%
- インレットバルブNEW! -47%
- ホース、クランクケースエア抜きNEW!
- バルブ、クランクケースエア抜きNEW!
- シールセット、クランクケースNEW! -35%
- インテークホース、エアフィルターNEW! -38%
- クランクシャフトベアリングNEW! -34%
- タペットNEW!
- Sump -35%
- オイルポンプNEW!
- シリンダーヘッドカバーNEW!
- 制御バルブ、カムシャフト調整NEW!
- 制御チェーンNEW!
- シールフルセット、エンジンNEW! -34%
- シールリング、バルブシャフトNEW! -36%
- バルブガイドNEW! -36%
- 圧力トランスデューサ、排気ガス制御NEW!
- センサー、エンジンオイルレベルNEW!
- テンショナー、制御チェーンNEW!
- シール、インテークマニホールドハウジングNEW! -38%
- シール、オイルクーラーNEW!
- シール、サーモスタットNEW! -43%
- ロッカーアーム、エンジン制御NEW!
- 漏斗、オイルゲージNEW!
- シールセット、インテークマニホールドNEW!
- カムシャフトNEW! -29%
- シリンダーヘッドNEW! -15%
- シャフトシールリング、カムシャフトNEW!
- ホース、シリンダーヘッドカバーエア抜きNEW!
- コンロッドベアリングセットNEW!
- チェーン、オイルポンプドライブNEW! -36%
- スロットルケーブルNEW!
- ロッカーアーム、エンジン制御NEW!
- クランクシャフトベアリングセットNEW!
- ピストンNEW! -32%
- ギア、クランクシャフトNEW!
- シール、ハウジングカバー (クランクケース)NEW!
- スペーサー、クランクシャフトNEW!
- シールセット、補助駆動装置NEW!
- コアアセンブリ、過給器NEW!
- 調整ディスク、バルブ遊びNEW! -43%
- 凍結防止プラグNEW!
- シリンダーライナーNEW! -35%
- シール、インテーク/エグゾーストマニホールドNEW!
- シリンダーヘッドボルトNEW!
- カムシャフトセットNEW!
- オイルホースNEW!
- ベアリングソケット、コンロッドNEW! -37%
- ボルトセット、プーリー-クランクシャフトNEW! -39%
- カムシャフトベアリングNEW!
- シャフトシールリングセット、エンジンNEW!
- 修理キット、ピストン/シリンダーライナーNEW!
- アクセサリセット、ロッカーアームNEW!
- シャフトシールリング、カムシャフトNEW!
- ロッカーアームセット、エンジンコントローラ NEW!
- 潤滑パイプ、カム潤滑NEW!
- シールリング、シリンダーライナーNEW!
- シール、タービンインレット (過給器)NEW!
- 油圧保持バルブNEW! -31%
- シールセット、シリンダーライナーNEW!
- シールセット、インジェクションポンプNEW!
- 圧力ピース、インテーク/エグゾーストバルブNEW!
- ロックキャップ、漏れ燃料NEW!
- ドライブトレインシステム部品
- ホイールベアリングセットNEW!
- ジョイント、ドライブシャフトNEW! -36%
- ドライブシャフトNEW!
- ベローズ、ドライブシャフトNEW! -35%
- シャフトシールリング、ディファレンシャルNEW! -36%
- ベアリング、ドライブシャフトセンターベアリングNEW!
- シャフトシールリング、マニュアルトランスミッションNEW!
- シャフトシールリング、ホイールハブNEW!
- アクスルナット、ドライブシャフトNEW!
- アクスルナックル、サスペンションNEW!
- ベアリング、ドライブシャフトNEW!
- シャフトシールリング、マニュアルトランスミッションフランジNEW!
- オイル、マルチプレートクラッチ-4WDNEW!
- キャップ、ホイールベアリングNEW!
- シール、オートマチックトランスミッションNEW! -36%
- ボールボルト、クラッチ作動NEW! -38%
- 改造キット、クラッチNEW!
- ウィンドウレギュレーター
- インテークシステムのパーツ
- マウントキット、過給器NEW! -36%
- 過給器、過給 -20%
- スロットルボディNEW!
- シールリング、チャージエアインテークホースNEW!
- インテークパイプモジュールNEW! -32%
- シール、過給器NEW! -42%
- スロットルケーブルNEW!
- オイルライン、過給器NEW!
- コアアセンブリ、過給器NEW!
- 組み立て用ペースト、ディーゼルインジェクタ/グロープラグNEW!
- スレッドボルト、ローダーNEW!
- 制御バルブ、コンプレッサーNEW!
- Sensor, differential pressureNEW!
- ケーブル修理キット、エアマスメーターNEW!
- ボルト、過給器固定NEW!
- スイッチ、クラッチ作動 (エンジン制御)NEW!
- ケーブル修理キット、燃料圧センサNEW!
- コントローラ、燃料インジェクションNEW!
- 燃料系統
- ホース、漏れ燃料NEW! -36%
- シールリング、ノズルホルダーNEW!
- リレー、燃料ポンプNEW!
- 加速ポンプ、キャブレターNEW!
- 修理キット、燃料ポンプNEW!
- 修理キット、コモンレールシステムNEW!
- シール、タンクセンサーNEW!
- インジェクションシステムNEW!
- シール、ノズルホルダーNEW!
- シールリングセット、インジェクションバルブNEW!
- 高圧ライン、インジェクション装置NEW!
- 燃料ドレンボルトNEW!
- ハウジング、燃料フィルターNEW!
- ディストリビュータパイプ、燃料NEW!
- ホルダー、燃料フィルターNEW!
- ノズルホルダーNEW!
- シールリング、ノズルシャフトNEW!
- シール、燃料容器キャップNEW!
- リレー、コールドスタート制御NEW!
- ロッドダンパー、インジェクション装置NEW!
- 燃料ホース -35%
- 排気システム
- エンドマフラーNEW! -34%
- 中間マフラーNEW! -35%
- シール、エキゾーストパイプNEW!
- ラバーストリップ、エグゾーストシステムNEW!
- 交換用触媒NEW! -30%
- エキゾーストパイプNEW!
- クランプピース、エグゾーストシステムNEW!
- マウントキット、過給器NEW! -36%
- シールリング、エキゾーストパイプNEW!
- ボルト、エグゾーストシステムNEW! -37%
- ストップバッファ、マフラーNEW!
- ホルダー、EGRバルブNEW!
- プリマフラーNEW!
- スプリング、マフラーNEW!
- ナット、排気ガスマニホールドNEW!
- スプリング、エキゾーストパイプNEW!
- コアアセンブリ、過給器NEW!
- シール、オイルアウトレット (過給器)NEW! -37%
- 取り付け用キット、触媒NEW!
- 配管、EGRバルブNEW!
- 圧力トランスデューサ、排気ガス制御NEW!
- バルブ、EGR排気ガス制御NEW!
- 保持リング、マフラーNEW!
- 切り替えバルブ、排気ガスフラップNEW!
- ボルト、エグゾーストマニホールドNEW!
- ケーブル修理キット、EGRバルブNEW!
- 燃料系統部品
- キャップ、燃料容器 -39%
- EGRバルブNEW!
- インジェクションノズルNEW! -23%
- センサー、燃料圧力NEW!
- ノックセンサーNEW! -35%
- スロットルボディNEW!
- シールリング、ノズルホルダーNEW!
- 圧力トランスデューサ、排気ガス制御NEW!
- シールリング、インジェクションバルブNEW!
- 燃料圧レギュレータNEW!
- センサー、アクセルペダルの状態NEW!
- 圧力制御バルブ、コモンレール-システムNEW!
- シールセット、インジェクションノズルNEW!
- ヒートシールド、インジェクション装置NEW!
- センサー、燃料レベルNEW!
- 空圧センサー、高さ調節NEW! -35%
- ポンプ、燃料フィーダーNEW!
- 修理キット、インジェクションノズルNEW! -35%
- 遮断装置、インジェクション装置NEW!
- 燃料ポンプNEW!
- 修理キット、ポンプ・ノズル・ユニットNEW!
- ノズルホルダーNEW!
- インジェクションポンプNEW!
- バルブ、インジェクション装置NEW!
- コントローラ、インジェクション装置NEW!
- 工場設備
- その他
- シールNEW!
- 保持クリップNEW!
- ウェッジ型スペーサーユニット、ドラムブレーキNEW!
- フロントガラスNEW!
- エンジンオイルNEW!
- ロッドアジャスターNEW!
- オートマチックトランスミッションオイルNEW!
- スペーサリングNEW!
- リアウィンドウNEW!
- オートマチックトランスミッションオイルNEW!
- サイドウィンドウNEW!
- 制御エレメント、インジェクションポンプNEW!
- ダンパー、エンジンベアリングNEW!
- 圧力スイッチNEW!
- アクスルボルト、ドライブシャフトNEW!
- ボルトNEW!
- アングルドライブ、スピードメーターシャフトNEW! -38%
- 圧力レギュレータ、燃料ポンプNEW!
- シール、オイルインレット (過給器)NEW!
- リレー、ABSNEW!
- シールセット、エグゾーストシステムNEW! -36%
- 表示、燃料備蓄NEW!
- マウントツールセット、クラッチ/フライホイールNEW!
- 中空ホイール、遊星歯車トランスミッション (スターター)NEW!
- フィルター、燃料フィーダーユニットNEW!
- スイッチ、四輪駆動NEW!
- 修理キット、エキゾーストパイプNEW! -36%
- クランプピースセット、エグゾーストシステムNEW!
- ステアリングホイールNEW!
- ワッシャー、プーリー-クランクシャフトNEW!
- スイッチ、メインライトNEW!
- ギア、ディストリビュータシャフトNEW!
- その他
- アースケーブル、点火ディストリビュータ
- カバー、バッテリー端子クランプ
- キャリングバッグ
- クラクション
- ハンドポンプ
- バッテリー極クランプ
- ワイヤーブラシ、バッテリー極/クランプクリーニング
- 車両-コンビネーション塗料
- 暖房システム
- 付属品
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Car flags
- Car seat covers
- Children's goods
- Clamps and ties
- Covers for car documents
- Electronic parking clock
- Fefrigerators and cooling boxes
- First aid kit
- Flashlights, lamps
- Indicators
- Inner tubes
- Interior freshener
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Parking assistant system -22%
- Parking clock
- Pets
- Rudder cover
- Stickers and car identification
- Tape
- Tint films for car
- Vacuum Cleaners
- Warn jacket
- Warning triangle
- Winches
- Wipes
- すき
- アイススクレーパー
- アクセサリ
- エアダクト
- キャニスター
- キーホルダーセット
- シガーライター
- ステッカー
- スポンジ
- ボールロッドホルダー、ヒッチ
- マルチメータ
- リフレクター
- ルーフキャリア
- ルーフボックス
- 回転灯
- 水用キャニスタ
- 消火器
- 無線
- 牽引ワイヤー
- 絶縁テープ
- 車両洗浄ブラシ
- 防護眼鏡
- ユニバーサルベアリング
- 化学および化粧品ケア製品
- あなたにお勧め
- 暖房システム
- エンジン予熱システム
- Peugeotのエンジン予熱システム